300ML SINGLE TUBE SILICONE DISPENSING GUN
WDB-G-1006
Manual injection cartridge sealant caulking gun
WDB-G-1006 is a professional one component caulk gun with 12:1 thrust ratio. It is perfect to use with 300ml cartridge for applying standard materials such like acrylic, silicone and polyurethane. This 10oz single tube dispenser is very light and handy with plastic barrel design and impact-resistant handle and trigger. The 360-degree rotary type carriage provides flexibility in small and tight working areas. Suitable for low and medium viscosity materials.
Silicone caulking gun for single cartridge
Silicon gun is very common tool for household maintenance. And there are diverse quality of silicone gun available in the market. We offer different level silicone gun for various application demands. Single cartridge silicone dispenser is also for 150ml and 300ml two components chemical anchor resin. Customized color coating and branding on gun are available.
Specification of WDB-G-1006 300ml single tube silicone dispensing gun
- Item No.: WDB-G-1006
- For 300ml single tube, also available for silicone sealant
- Color: Black/Red/Blue
- Thrust Ratio: 12:1
- Handle: Impact-resistant Nylon and glass fiber
- Trigger: Impact-resistant Nylon and glass fiber
- Carriage: ABS Polymer
- Suitable for WDB 150ml cartridge of Polyester, Epoxy Acrylaye and Vinylester.
WDB-G-1006 manual sealant caulk gun has anti-drip design
- Steady quality with competitive price
- Easy installation and operation
- Energy saving design
- High quality for long-term using
- Anti-drip design
- Built-in cartridge puncture tool
- Press the trigger for short time pause or pulling out the steel arm
Standard Packing
- 12pcs per carton
- Carton dimension: 40.9×27.3×24.8cm(H)
- N.W.: 12KGS
- G.W.: 12.7KGS
- Other packing requirements, please check with us.
How to install chemical anchor?
1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can’t be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don’t touch until full curing. The installation process will affect the bonding performance of chemical anchors.
